Operating Instructions
Connecting Additional Equipment
TV and VCR
Rear of TV
| 2 |
| VCR |
Coaxial |
|
Cable |
|
1 | Video (yellow) |
From | |
cable/ | Audio L (white) |
antenna | Audio R (red) |
|
Optional connection
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR).
1Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
You can use the 
button to switch between the VHF/UHF and VIDEO inputs.
4