Operating Instructions
Using the Timer 
Menu
To access the Timer menu, refer to the following steps:
To Display | To Highlight | To Select |
MENU |
|
|
| Timer |
|
|
|
| Timer 1: Set |
|
| |
| Timer 2: Set |
|
| |
| Current | Time |
|
|
| Daylight Saving: NO |
| ||
|
| : | AM |
|
| Move | Select | End MENU |
|
Current Time | 1 Press F or f to select the current time, then press | . | ||
| (If you are in Daylight Saving time, be sure to set the |
| ||
| Daylight Saving mode in “YES”) |
| ||
2Press F or f to enter the correct time, then press 
.
3Press MENU to exit the menu.
Timer 1 and | With the menu open, set cursor on Timer 1 or Timer 2: |
| ||
Timer 2 | 1 | Press F or f to select Timer 1 or Timer 2, then press | . | |
Scheduled | 2 | Press F or f to enter your time and channel of |
| |
viewing |
| preference, then press | . |
|
3Press MENU to exit the menu.
You must set the Current Time before you can use Timer 1 and Timer 2.
You can set the Timer to ON, OFF, or Set. Once the timer is set, you can turn it on or off without having to go through the settings.
Daylight | YES: Select in spring to compensate for Daylight Saving. |
Saving | NO: Select in fall at the end of Daylight Saving. |
When you perform Auto Program, all Timer 1 and Timer 2 settings will be cleared.
Any loss of power will cause Current Time, Timer 1 and Timer 2 settings to be cleared.
28