Overview of Remote Control Buttons

1Muting the sound: Press to mute the TV sound. Press again to restore the sound.

2Displaying on screen information: Press to display all on-screen indications. Press again to cancel.

3To temporarily switch off TV: Press to temporarily switch off the TV (the standby indicator 1 on TV lights up). Press again to switch on the TV from standby mode.

To save energy we recommend switching off completely when the TV is not in use.

After 15 minutes without a signal and without any button being pressed, the TV switches automatically into standby mode.

4Selecting TV mode: Press to switch off teletext or video input.

5Selecting channels: Press to select channels. for double-digit programme numbers, enter the second digit within 3 seconds.

6Back to the channel last watched: Press to watch the last channel selected (watched for at least 5 seconds).

7 Selecting channels: Press to select the next or previous channel.

GB

8Displaying the menu system: Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen.

9Menu selection:

V Scroll Up

vScroll Down

BPrevious menu or selection b Next menu or selection

Confirm your selection

q; Selecting Teletext: Press to switch on teletext.

qa Selecting screen format: Press to view programmes in 16:9 mode. Press again to return to 4:3 mode.

qs Selecting sound mode: Press repeatedly to change the sound mode.

qd Selecting picture mode: Press repeatedly to change the picture mode.

qf This button does not work on this set.

qg Sleep Timer: Set TV to switch off automatically.

qh Adjusting TV volume: Press to adjust the volume of the TV.

qj On Timer: Set TV to switch on automatically.

qk For double digit programme numbers, press -/-- and then the first and second digit. If you enter an incorrect first digit, this should be corrected by entering another digit (0-9) and then selecting -/-- button again to enter the programme number of your choice.

ql Selecting stereo broadcast or sound channel: In case of a bilingual broadcast, press this button repeatedly to select sound channel 1 or sound channel 2.

w; Selecting input source: Press repeatedly until the desired input symbol of the source appears on the TV screen.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section of this instruction manual (see page 14).

Overview 5