Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV Broadcast), 4) change the order in which the channels (TV Broadcast) appear on the screen and 5) adjust the picture slant.

However, if you need to change any of these settings at a later date, you can do that by

selecting the appropriate option in the (Set Up) or (Channel Set Up) menu.

1 Connect the TV plug to the mains socket (220-240 V AC, 50 Hz). Press ! On/Off button on the TV set to switch on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen.

2 Press 2 +/– button on the top control panel to select the language, then press t to confirm your selection. From now on all menus will appear in the selected language.

Language

Svenska

Norsk

English

Nederlands

Français

Select language

Select [–2+] Confirm [t]

3 The Country menu appears automatically on the TV screen. Press

2+/– button to select the country in which you will operate the TV set, then press t to confirm your selection.

•If the country in which you want to use the TV set does not appear in the list, select “-” instead of a country.

•In order to avoid wrong teletext characters for Cyrillic languages we recommend to select Russia in the case that your own country does not appear in the list.

Country

Sverige

Norge

–

Italia

Schweiz/Suisse/Svizzera

Select Country

Select [–2+] Confirm [t]

4 Ensure the aerial is connected as instructed, then press t to confirm. The TV automatically starts searching and storing all available broadcast channels for you.

•This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed.

•If no channels were found during the auto tuning process, a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 7) and press t. The auto tuning process will start again.

Initial Set Up

First please connect aerial

Do you want to start automatic tuning?

Yes

No

Select [–2+] Confirm [t] End

Auto Tuning

No channel found

Please connect aerial

OK

Confirm [t] End

8First Time Operation