Manual

The “Manual Programme Preset” option in the “Channel Set Up”

Programme

menu allows you to:

Preset

a) Preset channels or a video input source one by one to the

 

programme order of your choice.

To do this:

1After selecting the “Manual Programme Preset” option, press

. Highlight the Programme option and press . Press or

to select a programme number on which you want to preset the channel (for VCR, select programme number “0”), then press .

The following option is only available depending on the country you have selected in the “Language/Country” menu.

2After selecting the System option, press . Press or to select the appropriate broadcast TV system (B/G or D/K) until the correct sound is heard, then press .

3After selecting the Channel option, press . Press or to select the channel tuning (C for terrestrial channels or S for

cable channels). Next press . After that, press the number buttons to directly enter the channel number of the TV

Broadcast. If you do not know the channel number, press or

to search for it. When you tune the desired channel, press

twice to store.

Repeat all the above steps to tune and store more channels.

b)Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture if the picture is distorted.

To do this:

While watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press or to adjust the fine tuning between -15 and +15. Finally press twice to store.

c)Skip any unwanted programme numbers when they are selected with the PROG +/– button.

To do this:

Highlighting the Programme option, press PROG +/– to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Next press or to select Yes. Finally press twice to confirm and store.

To cancel this function afterwards, select No instead of Yes in the step above.

14Menu System