Operating Instructions
Connecting a TV and Satellite Receiver
From |
|
cable/ |
|
antenna | Rear of TV |
| 2 | 3 4 | 5 AUDIO OUT |
| 1 | ||
|
|
| (VAR/FIX) |
|
|
| Y |
|
| S VIDEO |
|
|
|
| PB |
| Satellite receiver |
| PR |
1 | VIDEO |
| |
| L | L | |
|
| (MONO) | (MONO) |
|
| R | R |
| Satellite |
|
|
| antenna |
|
|
| cable |
| Video (yellow) |
| 3 |
| Audio L (white) |
|
|
| Audio R (red) |
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.
3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏Program your Sony remote control to operate your satellite receiver (see page 5).
❏To activate your remote, press to operate your satellite receiver. See page 7 on how to operate other functions.
❏Press repeatedly to switch to satellite receiver input (VIDEO input).
16