Sony TV, VCR, and Cable Box, Cable Box, Rear of TV, 1 Splitter

Connecting Your TV

TV, VCR, and Cable Box

Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This set up allows you to use the remote control to:

a)change channels through your cable box or VCR when you are receiving a scrambled signal, and

b)change channels through your TV.

This connection also allows you to use the PIP feature when you are viewing unscrambled channels coming directly into your TV from your cable. Scrambled signals coming through the cable box cannot be viewed in PIP. For more information on the PIP feature, see page 18.

Rear of TV

2b	VCR	Video (yellow)
		Audio L (white)
		Audio R (red)
	3
1 Splitter	Cable Box
		Optional connection
Cable	2a

1 Connect the single input jack of the splitter to your incoming cable connection.

2 Using a coaxial cable (not supplied), connect the two output jacks of the splitter to:

a)the IN jack on your cable box, and

b)the VHF/UHF jack on the TV.

3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack on your VCR.

(continued)

7