Sony KV-28CL11K, KV-29CL11K 14

•Level 1

Level 2

Level 3 / Function

•

Picture Adjustment

•

Mode: Personal

•

Contrast

Brightness

Colour

Sharpness

•

Hue

Reset

•

Set Up

Language/Country

•

Language/Country

Auto Tuning

Programme Sorting

•

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

MANUAL PROGRAMME PRESET

The “Manual Programme Preset” option in the “Set Up” menu allows you to:

1)Preset channels or a video input source one by one to the programme order of your choice.

a)After selecting the ”Manual Programme Preset” option, press then with Programme option

highlighted press . Press or to select on which programme number you want to preset the channel (for VCR, select programme number “0”). Then press .

b)The following option is only available depending on the country you have selected in the

“Language/Country” menu. After selecting the System option, press . Then press or to select the TV broadcast system (B/G for western European countries, D/K for eastern European countries). Then press .

c)After selecting the Channel option, press . Then press or to select the channel tuning

(“C” for terrestrial channels or “S” for cable channels). Next press . After that, press the number buttons to enter directly the channel number of the TV broadcast or the channel of the VCR signal. If you

do not know the channel number, press or to search for it. When you have tuned the desired channel, press OK twice to store.

Repeat all the above steps to tune and store more channels.

2)Label a channel using up to five characters. To do this: Highlighting the Programme option, then press the PROGR +/- button to select the programme number with the channel you wish to name. When the

programme you want to name appears on the screen, select the Label option and press . Next

press or to select a letter, number or “-“ for a blank. Press to confirm this character. Select the other four characters in the same way. After selecting all the characters, press OK twice to store.

3)Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune the TV to obtain a better picture reception in the case that the picture is distorted. To do this: while watching the

channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next

press or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.

4)Skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To do this: Highlighting the Programme option, press the PROGR +/- button to select the programme number you

want to skip. When the programme you want to skip appears on the screen, select the Skip option and

press . Next press or to select Yes. Finally press OK twice to confirm and store. To cancel this function afterwards, select “No” instead of “Yes” in the step above.

5)View and record correctly scrambled channels when using a decoder connected directly to the Scart

2/ S or through a VCR. This option is only available depending on the country you have selected in the “Language/Country” menu. To do this: select the Decoder option and press . Next

press or to select On. Finally press OK twice to confirm and store.

To cancel this function afterwards, select “Off” instead of “On” in the step above.

14Menu System