Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
| Problem | Solution |
|
No picture (screen is dark) | • Check the aerial connection. |
|
and no sound. | • Plug the TV in and press the | button on the front of the TV. |
•If the standby indicator 
is on, press TV 
button on the remote control.
Poor or no picture (screen is dark), but good sound.
No picture or no menu information from equipment connected to the Scart connector.
Good picture, no sound.
•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings (see page 9).
•Check that the optional equipment is on and press the 
button repeatedly on the remote control until the correct input symbol is displayed on the screen (see page 21).
•Press the 
+ button on the remote control.
•Check that “TV Speakers” is “On” in the “Sound Adjustment” menu (see page 10).
•Check that headphones are not connected.
No colour on colour programmes.
When you switch on the TV does not appear the last channel you were watching before switching the TV off.
•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to factory settings (see page 9).
•This is not a malfunction. Press the number buttons on the remote control to select the desired channel.
Distorted picture when | • Turn off any equipment connected to the Scart connector on |
changing programmes or | the rear of the TV. |
selecting teletext. |
|
Wrong characters appear | • Using the menu system, enter to the “Language/Country” |
when viewing teletext. | menu and select the country in which you operate the TV set. |
| For cyrillic languages, we recommend selecting Russia |
| country if your own country does not appear in the list. |
Wrong characters appear | • Using the menu system enter to “Language/Country” menu |
when viewing NexTView. | (see page 13) and select the same language as the NexTView |
| is broadcasted. |
| continued... |
24Additional Information