Problem | Solution |
Picture slanted | • Using the menu system, select the “Picture Rotation” option |
| in the “Detail Set Up” menu to correct the picture slant (see |
| page 16). |
Noisy picture when viewing | • Using the menu system, select the “Manual Programme |
a TV channel. | Preset” menu and adjust Fine Tuning (AFT) to obtain better |
| picture reception (see page 15). |
| • Using the menu system, select the “Noise Reduction” option |
| in the “Picture Adjustment” menu and select “Auto” to |
| reduce the noise in the picture (see page 9). |
No unscrambled picture | • Using the menu system, select the “Features” menu. Then | ||||||||
whilst viewing an | enter “Detail Set Up” option and set “AV3 Output” to “TV”. | ||||||||
unscrambled channel with a • Check that the Decoder is not connected on the scart | |||||||||
decoder connected through |
|
| 2/ | 2. |
| ||||
|
| ||||||||
the Scart connector |
|
|
|
|
| ||||
|
|
|
| GB | |||||
|
| 3/ |
| S 3. |
|
|
|
| |
|
|
|
|
|
|
| |||
Remote control does not | • Check that the Media Selector on the remote control is set to | ||||||||
function. | the device you are using (VCR, TV or DVD). | ||||||||
•If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on “Remote Control Configuration for VCR/DVD” chapter of this instruction manual (see page 22).
•Replace the batteries.
The standby indicator 
on • Contact your nearest Sony service centre. the TV flashes.
If you continue to experience problems, have your TV serviced by qualified personnel. Never open the casing yourself.
Additional Information 25