Additional TV Features
Setting up Dolby Pro Logic
Before listening to Dolby Pro Logic encoded programmes, you can adapt the Dolby features to suit your own taste. Normally this is only required when you install the TV and the speakers, or when changing the speaker positions.
OK
.
.
1.Press the MENU button on the remote control to display the menu on the TV screen.
2.Press the V or v buttons to select the 
symbol on the menu screen then press the b button to enter the
‘PRESET’ menu.
3.Press the V or v buttons to select ‘Dolby Pro Logic Setup’ on the menu screen then press the b button to enter the ‘DOLBY PRO LOGIC SETUP’ menu.
4.Press the V or v buttons to select ‘Mode’, then press the b button to enter. Press the b or B buttons to select one of the following modes then press the OK button to store the chosen mode:
Dolby Pro Logic: all 5 speakers are activated
Dolby 3 stereo: surround speakers are not used
5.Press the v button to select ‘Centre Mode’, then push the b button to enter. Press the b or B buttons to select one of the following modes then press the OK button to store the chosen mode:
Normal: all 5 speakers are activated
Wide: wider bandwidth for centre speaker
Phantom: centre speaker is not used
6.Press the v button to select ‘Test Tone’ then push the b button to enter. Press the b or B buttons to select ‘On’, then press the OK button.
The test tone will cycle through all the speakers.
7.Press the v button to select the ‘Left Speaker’, then press the b button to confirm. The tone remains at the left speaker.
8.Press the b or B buttons to alter the sound level, then press the OK button.
9.Repeat steps 7 and 8 to select and adjust the ‘Centre’,
‘Right’, and ‘Surround’ speakers, so that the sound output from all speakers are balanced in relation to your sitting position.
10.Press the MENU button to remove the display from the TV screen.
14