Sony KV-28FS20U Selecting the output source for the scart, socket G, Smartlink

Optional Equipment

Connecting equipment to the TV

1.Press the MENU button on the remote control to display the menu on the TV screen.

2.Press the V or v buttons to select the symbol on the menu screen then press the b button to enter the ‘VIDEO

CONNECTION’ menu screen.

3.Press the V or v buttons to highlight ‘TV Screen’ (input source

	for the TV screen) or ‘Output’ (output source for		2/ s 2
	socket) then press the b button to confirm.
OK	4. Press the b or B buttons to select the desired source (see below)
	then press the OK button to confirm:
	TV Screen	TV, AV1, RGB, AV2, YC2, AV3, YC3
	Output	TV, AV1, AV2, YC2, AV3, YC3, AUTO

Note: When Auto is selected as the output source, then the signal being viewed on the TV will also be output to AV2.

5. Press the MENU button to remove the menu from the TV screen.

Smartlink is a direct link between your TV set and VCR.

For Smartlink you need:

•a VCR which supports Smartlink, NexTView Link or Megalogic.

•a fully-wired 21-pin scart cable to connect your VCR to scart connector 2 /s 2 .

The features of Smartlink are:

•tuning information such as the channel overview are downloaded from the TV set to the VCR.

•direct TV recording: While watching TV you need to press just one button on the VCR to record this programme.

For more information on Smartlink please refer to your VCR instruction manual.

VIDEO CONNECTION