Optional Equipment

Connecting equipment to the TV

Selecting the output source for the scart

socket G

1. Press the MENU button on the remote control to display the menu on the TV screen.

2. Press the DOWN arrow key to select the symbol on the menu screen then press the RIGHT arrow key to enter the ‘VIDEO CONNECTION’ menu screen.

3. Press the DOWN arrow key to highlight ‘TV Screen’ (input source for the TV screen) or ‘AV2 output’ (output source for 2 /s 2 socket) then press the RIGHT arrow key to confirm.

4. Press the LEFT or RIGHT arrow key to select the desired source (see below) then press the OK button to confirm:

TV Screen

TV, AV1, RGB, AV2, YC2, AV3, YC3

 

 

Output

TV, AV1, AV2, YC2, AV3, YC3, AUTO

 

 

5. Press the MENU button to remove the menu from the TV screen.

Smartlink

Smartlink is a direct link between your TV set and VCR.

For Smartlink you need:

•a VCR which supports Smartlink, NexTView Link or Megalogic.

•A fully-wired 21-pin scart cable to connect your VCR to scart connector 2 / s 2 .

The features of Smartlink are:

•tuning information such as the channel overview are downloaded from the TV set to the VCR.

•direct TV recording : While watching TV you need to press just one button on the VCR to record this programme.

For more information on Smartlink please refer to your VCR instruction manual.

PICTURE CONTROL

 

 

 

Picture Mode

Personal

PICTURE CONTROL

 

Contrast

. . . . . . . . .

 

 

 

Picture Mode

Personal

Reset

 

Contrast

. . . . . . . . .

 

FormatFormat

Wide

 

 

Reset

 

FormatFormat

Wide

 

 

VIDEO CONNECTION

TV Screen

 

[TV - - - - -]

Output

[AV 1 - - - - -]

TV

 

AV1

 

 

 

 

 

24