Overview of Remote Control Buttons

!§

!∞ !¢

!£

!™

!¡

!¶

1 To Temporarily Switch Off TV: Press to temporarily switch

1off TV (the standby indicator on TV lights up). Press again to switch on TV from standby mode.

To save energy we recommend switching off completely when TV is not

2in use.

After 15 minutes without a signal and without any button

3being pressed, the TV switches automatically into standby mode.

 

 

4

2 Selecting TV mode: Press to switch off teletext or video input.

 

 

 

 

 

5

3 Selecting channels: Press to select channels.

 

 

 

For double-digit programme numbers, enter the second digit

 

 

 

 

within 2.5 seconds, or press -/-- and then the first and second

6 digit.

7If you enter an incorrect first digit, this should be corrected by

8entering another digit (0-9) and then selecting -/-- button again

9to enter the programme number of your choice.

!º 4 Back to the channel last watched: Press to watch the last channel selected (watched for at least 5 seconds).

5Selecting channels: Press to select the next or previous channel.

6Displaying the menu system: Press to display the menu on the TV screen. Press again to remove the menu display from the TV screen.

7Menu selection

•When MENU is switched on:

Scroll Up.

Scroll Down.

Previous menu or selection.

Next menu or selection OK confirms your selection.

•When MENU is switched off:

OK Shows a channel overview.

Press orto select the channel and then, press again the OK button to watch the selected channel.

8Selecting Teletext: Press to switch on teletext.

9Selecting Screen format: Press to view programmes in 16:9 mode. Press again to return to 4:3 mode.

GB

!º This button only works in Teletext mode.

!¡ Selecting Picture mode: Press repeatedly to change the picture mode.

!™ Selecting sound mode: Press repeatedly to change the sound mode.

!£ Adjusting TV volume: Press to adjust the volume of the TV.

!¢ Choosing the Sound Channel: In case of a bilingual broadcast, press this button repeatedly to select sound channel 1 or sound channel 2.

!∞ Selecting input source: Press repeatedly until the desired input symbol of the source appears on the TV screen.

!§ Muting the Sound: Press to mute TV sound. Press again to restore the sound.

!¶ Displaying on Screen information: Press to display all on-screen indications. Press again to cancel.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section of this instruction manual on page 17.

Overview 5