4 You can assign an ID (number) to your Remote Control to avoid interference from other locators when you press the Remote Control Locator button on the TV set.
a)If you do not want to configure it, press OK to select No.b)If you want to configure it press 
to select Yes. Press OK. Next press one of the number buttons
The remote control beeps. Press OK to stop beeping.
ID should be assigned anytime the batteries of the remote control will be replaced.
Finally press OK to continue the process.
Remote Control ID
Do you want to configure your
Remote Control ID?
|
| Yes | |
|
| No |
|
|
|
|
|
Select: | Confirm: OK | ||
Remote Control ID
Introduce New ID
with number buttons:
-
Enter:
Remote Control ID
New ID is: 5
Now beeping, please
press any button to stop.
Confirm: OK
5 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
Do you want to start automatic tuning?
Yes
No
6The TV starts to automatically search and store all available broadcast channels for you.
This procedure could take some minutes. Please be patient and do not press any buttons, otherwise automatic tuning will not be completed.
In some countries the TV Broadcaster installs the channels automatically (ACI system). In this case, the TV Broadcaster sends a menu in which you can select your city by pressing the 
or 
button and OK to store the channels.
If no channels were found during the auto tuning process then a new menu appears automatically on the screen asking you to connect the aerial. Please connect the aerial (see page 6) and press OK. The auto tuning process will start again.
Auto Tuning |
|
Programme: | 1 |
Channel: | C 01 |
Searching...
No channel found
Please connect aerial
Confirm
continued...
8First Time Operation