Selecting a stereo or bilingual program (continued)When receiving an A2 (German) program

Broadcasting

On-screen display (Selected sound)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A2

(German) stereo

 

 

MONO

 

 

 

 

STEREO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Regular sound)

(Stereo sound)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A2

(German) bilingual

 

 

MAIN

 

 

 

SUB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Main sound)

(Sub sound)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Receiving area for NICAM and A2 (German) programs

System

Receiving area

 

 

NICAM

Hong Kong, Singapore, New Zealand, Malaysia,

 

Thailand, etc.

 

 

A2 (German)

Australia, Malaysia, Thailand, etc.

Notes

•If the signal is very weak, the sound becomes monaural automatically.

•If the stereo sound is noisy when receiving a NICAM program, select “MONO.” The sound becomes monaural, but the noise is reduced.

If the sound is distorted or noisy when receiving a monaural program through the ù (antenna) terminal

Press A/B repeatedly until “MONO” appears on the screen.

To cancel the monaural sound setting, press A/B again until “AUTO” appears on the screen.

MONO

 

AUTO

 

Notes

•The “MONO” or “AUTO” setting is memorized for each program position.

•You cannot receive a stereo broadcast signal when the TV is in the “MONO” setting. Normally, set the TV to “AUTO.”

22Advanced Operations