Presetting channels manually
To change the program position for a channel or to receive a channel with a weak signal, preset the channel manually.
1
2 Press PROGR +/– until the required program position appears on the screen.
3
4 Press + or – until the required channel picture appears on the screen.
5 Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound may be noisy. In this case, select the appropriate TV system.
1Press PROGR +/– to select the program position.
2Press TV SYSTEM until the picture and sound become normal.
TV SYSTEM
Note
•The setting of the TV SYSTEM is memorized for each program position.
Disabling program positions
By disabling unused or unwanted program positions, you can skip those positions when you press PROGR
1 Press PROGR +/– until the unused or unwanted program position appears on the screen.
2 Press MANUAL PROGR.
3 Press ENTER (CLEAR) on the TV.
4 Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
8 Getting Started