Sony KV-G21L3 service manual Picture Tube Removal, HOW to Handle AN ANODE-CAP

– 13 –

2-6. PICTURE TUBE REMOVAL

3 C board

4 Deflection yoke 2 A board 5 Four screws (Tapping screws)

1 Anode cap

Cushion

• REMOVAL OF ANODE-CAPNOTE : After removing the anode short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT. • REMOVING PROCEDURES

a

a

1 Turn up one side of the rubber cap in the direction indicated by the arrow a.

b

b

2Using a thumb press down then pull up the rubber cap firmly in the direction indicated by the arrow b.

c

Anode Button

3When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c.

•HOW TO HANDLE AN ANODE-CAP

1Do not damage the surface of anode-caps with sharp shaped objects

2Do not press the rubber too hard so as not to damage the inside of anode-caps A metal fitting called the shatter-hook terminal is built into the rubber.

3Do not turn the foot of rubber over too hard

The shatter-hook terminal will stick out or damage the rubber.

KV-G21L3

RM-883