| Do not plug in too many appliances to the same |
Do not place any objects on the TV. | power socket. Do not damage the power cord. |
| Pull the power cord out by the plug. Do not pull |
Install the TV on a stable TV stand and floor | the power cord itself. Even if your TV is turned |
off, it is still connected to the AC power source | |
which can support the TV set weight. Ensure that | (mains) as long as the power cord is plugged in. |
the TV stand surface is flat and its area is larger | Unplug the TV before moving it or if you are not |
than the bottom area of the TV. | going to use it for several days. |
CSecuring the TV
BTo prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.
| 20 mm |
|
| 3.8 mm |
|
screws | clamps | band |
Screw the band to the TV stand and to the provided hole at the rear of your TV.
or
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV.
Note
• Use only the supplied screws. Use of other screws may damage the TV.