xGetting Started
Step 1
Insert the batteries (supplied) into the remote.
b | Note |
|
• Do not use old or different types of batteries together.
Step 2
Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.
Tips
•Your TV can receive both TV and FM radio signal from the appropriate connections through the 8 (antenna input) terminal (see page 22).
•You can also connect your TV to other optional components (see page 22).
Installation
b
Step 3
Plug in the power cord, then press ! on the TV to turn it on.
Note
•The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.
Step 4
Set up the TV by following the instructions of the “Начальная настройкa” (“Initial Setup”) menu (see page 6).
Installation 5