Sony KV-SW252, KV-SW252M91, KV-SW292, KV-SW292M91 xSetting up your TV, (“Initial Setup”)

xSetting up your TV

(“Initial Setup”)

When you turn on your TV for the first time, the “Initial Setup” menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.

1	Press V or v to select the desired menu
	language, then press .
	The selected menu language appears.
		Select	Confirm	End
2	Press V or v to select “Yes”, then press
	to preset the channels automatically.
	The screen will indicate automatic
	presetting is in progress.
	After all available channels have been tuned	Select	Confirm	End
	and stored, the “Program Sorting/Edit”	Program:		01
	menu appears automatically on the screen.
		TV System:		Auto
		VHF Low

To skip automatic channel presetting, select “No”, then press .

End

If the message “No channel found. Please connect cable/antenna” appears, check your TV connections, then press .

3	The “Program Sorting/Edit” menu enables
	you to sort and edit the channels.
	a) If you wish to keep the channels in the current	Program Sorting/Edit
	condition, press WEGA GATE to exit.	PROG Label Skip
		01	Off
	b) Press V or v to select the program	02	Off
		03	Off
	number with the channel you wish to	04	Off
		Sorting:	Edit:
	change. The selected channel will appear	Select	Confirm Exit

on the screen.

c)If you wish to store the channels in a different order:

1)Press b to enter sorting mode.

2)Press V or v to select the new program number position for your selected channel, then press B.

Program Sorting/Edit

PROG	Label	Skip
01		Off
02		Off
03	01		Off
04		Off
Sorting mode
Select		Confirm	Exit

6Installation