![](/images/new-backgrounds/1305572/30557211x1.webp)
Presetting channels
Presetting channels automatically
You can preset up to 80 TV channels in numerical sequence from program position 1.
Presetting channels manually
To change the channel for a particular program position or to receive a channel with a weak signal, preset the channel manually.
1
2 Press PROGR +/– until the required program position appears on the screen.
3 Press TV SYSTEM until your local TV system appears.
4 Press VOLUME +/– on the TV until the
2 3
Front of TV
COLOR SYSTEM | SELECT | TV SYSTEM MANUAL PROGR AUTO PROGR |
1
POWER
required channel picture appears on the screen.
5 Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound may be noisy. In this case, select the appropriate TV system.
1 Press POWER.
POWER
When the TV is in standby mode after pressing POWER, press POWER on the remote commander.
2 Press TV SYSTEM until your local TV system appears.
B/G |
| I |
| D/K |
| M |
|
|
|
|
|
|
|
TV SYSTEM
3 Press AUTO PROGR.
1 |
| 2 |
| 3 |
| 1 |
|
|
|
|
|
|
|
AUTO PROGR
To start presetting channels automatically from the specified program position
1Press MANUAL PROGR.
2Press TV SYSTEM to select your local TV system.
3Press PROGR +/– to select the program position.
4Press AUTO PROGR.
1Press PROGR +/– to select the program position.
2Press TV SYSTEM until the picture and sound become normal.
Notes
∙If you do not know your local TV system, consult your nearest authorized service center or dealer.
∙The setting of the TV SYSTEM is memorized for each program position.
Disabling program positions
By disabling unused or unwanted program positions, you can skip those positions when you press PROGR
1 Press PROGR +/– until the unused or unwanted program position appears on the screen.
2 Press MANUAL PROGR.
3 Press PIC MODE on the remote commander.
4 Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.