Notes

 

• If you connect a monaural VCR, connect the yellow plug to

(the

yellow jack) and the black plug to -L (MONO) (the white jack).

•If you connect a VCR to the ù(antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV.

•When no signal is input to the connected video equipment, the TV screen becomes blue.

CAUTION

Do not connect the power cord until all other connections are complete; otherwise, a minimal current leakage through the antenna and/or other terminals to the ground could occur.

Step 2

Insert the batteries into the remote

Note

• Do not use old batteries or different types of batteries together.

Step 3

Preset the channels automatically

Front of TV

1

2

1

1

 

 

VHF LOW B/G

 

ONE-PUSH AUTOMATIC PROGRAMMING

 

 

Tips

•If you want to stop automatic channel presetting, press SELECT twice.

•If an unwanted channel has been preset or you cannot preset a particular channel, preset your TV manually (see page 9).

Note

•During automatic channel presetting, the TV screen displays either B/G, I, D/K, or, M for the TV system (see page 8).

Now You Are Ready. . .

To watch the TV, see page 11.

TV New Your Using

Using Your New TV 5