Notes

•If you connect a monaural VCR, connect the yellow plug to(the yellow jack) and the black plug to -L (MONO) (the white jack).

•If you connect a VCR to the 8 (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV.

•When no signal is input from the connected video equipment, the TV screen becomes blue.

KV-XG29M81/XG29M80/XG25M80 only

•Do not connect video equipment to the t2 (video input) jacks at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen.

CAUTION

•Do not connect the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately wash it away with water.

Step 2

Insert the batteries into the remote

Note

• Do not use old batteries nor use different types of batteries together.

Step 3

Your Using TV New

Preset the channels automatically

Front of TV

1 !

2

1

1

 

AUTO

PROGR

VHF LOW B/G

Tips

•If you want to stop automatic channel presetting, press SELECT twice.

•If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 11).

Note

•During automatic channel presetting, your TV screen will indicate “B/G” , “I”, “D/K” or “M” for the TV system (TV SYS).

Using Your New TV 5