Operating Instructions

Connecting Additional Equipment

Connecting a TV and VCR

Rear of TV

1

From cable/antenna

2

VCR

1

3

 

 

 

SUBWOOFER

AUDIO

AUDIO

( AUDIO

)VAR/FIX

 

 

Video (yellow)

Audio L (white)

Audio R (red)

Optional connection

1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.

2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.

Optional connection

❏If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.

❏For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables.

Using your TV with this connection

This connection allows you to do the following:

❏Program your Sony remote control to operate your VCR (see page 5).

❏To activate your remote, press to operate your VCR. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 28).

❏Press repeatedly to switch between VCR input (VIDEO input) and VHF/UHF (local channels).

12