Operating Instructions
TV, VCR, and Cable Box
3
VCR
2
Cable Box 
4
1
From cable
Rear of TV
1 | 3 |
|
|
| SUBWOOFER |
AUDIO | AUDIO | AUDIO |
( | ||
|
| )VAR/FIX |
Video (yellow) 
Audio L (white)
Audio R (red)
1
2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack on your VCR.
3 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
4 If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
Optional connection
❏For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
Using your TV with this connection
❏Program your Sony remote control to operate your VCR or cable box (see page 5).
❏To activate your remote, press 
to operate your VCR or 
to operate your cable box. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 28).
❏Press 
repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local channels or unscrambled), or cable box (cable system or scrambled channels).
14