Sony KV 36FS12 Using Auto Setup, Press POWER to turn on the TV, Press CH+ to run Auto Setup or press CH– to exit

Installing the TV

Using the CONTROL S Feature

✍This CONTROL S feature applies to all models except KV-36FS12 and 36FS16.

CONTROL S allows you to control your TV system and other Sony equipment with one remote control.

To control your other Sony equipment with your TV’s remote control, use a CONTROL S cable (not supplied) to connect the equipment’s CONTROL S IN jack to the TV’s CONTROL S OUT jack.

TV

Setting Up the TV Automatically

After you finish connecting your TV, you need to run Auto Setup to set up your channels.

✍The Auto Setup feature does not apply for installations that use a cable box for all channel selection.

Using Auto Setup	1	Press POWER to turn on the TV.
		The first time you turn on the TV, the Auto Setup screen appears.
	2	Press CH+ to run Auto Setup or press CH– to exit.

✍ You can run Auto Program again by selecting it in the Channel menu, as described on page 29.

z To reset your TV to factory settings, turn the TV on. Then, while pressing the RESET button on the remote control, press the POWER button on the TV. The TV will turn itself off, then back on.

18