Recording CDs by specifying the track order
— Program Edit
You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
12 2 1113 p 3 p
9 1 5 EDIT 6 4,7
CHECK
1 Place CDs and close the front cover.
2 Insert a blank tape into deck B.
3 Press FUNCTION repeatedly until “CD” appears in the display.
4 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.
5 Press DISC SKIP to select a CD.
6 Turn the jog dial until the desired track appears in the display.
Disc number | Track number |
DOLBY NR
OFF
DISC PROGRAM
Total playing time (including selected track)
7 Press PLAY MODE once.
The track is programmed. “STEP” and the programmed playing order appear, followed by the total playing time.
The last programmed track
DOLBY NR
OFF
DISC PROGRAM
Total playing time
8 Repeat steps 5 through 7 to program additional tracks to be recorded on side A.
Skip step 5 to select tracks from the same disc.
9 Press P to insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
continued
27