Recording from a tape

High-speed Dubbing

You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted.

?/1

(Power)

x 3

1 x 4 2

1Press A EJECT Z and Z B EJECT and insert a recorded tape in deck A and a recordable tape in deck B.

With the side you want to play/record on facing forward

3Press DIRECTION repeatedly until gappears to record on one side or j(or RELAY) to record on both sides.

4Press X.

Dubbing starts.

When dubbing ends, decks A and B automatically stop.

To stop dubbing

Press x on deck A or B.

Tips

When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A.

Notes

If you set DIRECTION to j, when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together.

You cannot record the surround effect.

2Press H SPEED DUB.

Deck B stands by for recording.

20