Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner's memory first (see “Presetting radio stations” on page 12).
1 Press TUNER/BAND repeatedly until the band you want appears.
2 Press TUNING MODE repeatedly until “PRESET” appears.Each time you press this button, the tuning mode changes cyclically as follows: MANUAL t AUTO t PRESET
3 Press +/– (or PRESET +/– on the remote) to tune in the preset station you want.
Preset number* | Frequency |
MHz
DOLBY NR
OFF
VOLUME
*When only one station is preset, “ONE PRESET” appears.
To | Do this |
Turn off the radio | Press ?/1. |
|
|
Adjust the volume | Turn VOLUME (or press |
| VOL +/– on the remote). |
|
|
Press TUNING MODE repeatedly in step 2 until “MANUAL” appears, then press +/– to tune in the desired station.
Tips
•When an FM program is noisy, press STEREO/MONO so that “MONO” appears. There will be no stereo effect, but the reception will improve.
•To improve broadcast reception, reorient the antennas.
Using the Radio Data
System (RDS)
(For European model only)What is the Radio Data System?Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features, such as station name display and location of stations by program type. RDS is available only on FM stations*.
Note
RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak.
*Not all FM stations provide RDS service, nor do they all provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
Receiving RDS broadcasts
Simply select a station from the FM band.When you tune in a station that provides RDS services, the station name appears.
To check the RDS informationEach time you press DISPLAY, the display changes cyclically as follows:Station name* t Frequency t Program type* t Clock display t Effect status*If the RDS broadcast is not received, the station name and program type may not appear in the display.
continued
13