Location and Function of Parts and Controls
14
Input signals and adjustable/setting items
a : Adjustable/can be set
× : Not adjustable/cannot be set
*1 Adjustment of SUB CONTROL is the same.
*2 Wh en a component signal (480/60I or 480/60P) is inpu t
and the COMPONENT LEVEL is set to SMPTE, this can
be switchable.
*3 When a BKM-227W is installed, the number of the input
connector is increased.
*4 When a BKM-229X is installed, the number of the input
connector is increased.
*5 When a BKM-220D or BKM-243HS is installed, the
signal can be input.
*6 When a BKM-243HS is installed, the signal can be input.
*7 Only the interlace signal is input.
*8 The signal can operate with PRESET 2 to 6. (See page37.)
*9 The signal can only be selected in the main display. (See
“SUB INPUT SELECT” on page 28.)
*10 The signal cannot operate with PRESET 7 and 8.
*11 The signal can only operate with PRESET 1.
*12 The signal can only operate with PRESET 6.
Input signal
Item Video*3,
Y/C*3
B & W*3Component*4RGB*4SDI Computer
SD HD SD HD D1*5HD*6DVI HD15
CONTRAST*1a a a aaaaa a a
BRIGHT*1a a a aaaaa a a
CHROMA*1a×a aaaaa a a
PHASE*1a
(NTSC)
×a aaaaa a a
APERTURE a a a aaaaa a a
COLOR TEMP a a a aaaaa a a
COLOR SPACE a a a aaaaa a a
AUTO CHRO MA/
PHASE a×aa

×××× × ×

ACC a× × ××××× × ×
CTI a×a××××× × ×
V SHARPNESS aaa×a×a×× ×
MATRIX*2××a××××× × ×
COMPONENT LEVEL ××
a
(480/60I) ×××××× ×
NTSC SETUP a
(NTSC)
a
(480/60I) × ××××× × ×
SCAN a a a aaaaa ×*8×*8
GAMMA a a a aaaaa a a
ASPECT*10 aaa×a×a××*12 ×*12
BLUE ONLY a×a aaaaa ××
MONO a×aa××aa ××
APA × × × ××××× × a*11
SIZE × × × ××××× × a
SHIFT a a a aaaaa ×a
PITCH × × × ××××× × a
DOT PHASE × × × ××××× × a
POWER SAVING a a a aaaaa a a
PICTURE DELAY
MIN*7
a a a aaaaa ×*8×*8
MULTI DISPLAY a a a aaaaa a*9a*9