Location and Function of Parts and Controls 15
Side/Rear Panel
aDC 5V/24V IN connector
Connect the DC connector of the supplied AC adaptor.
b/ (power) switch
The power is turned on or off.
The monitor is turned on by pressing side .
cLoop-through output connectors
Outputs the signals input to the input connectors (5 to
0). Connect to the analog input (composite, Y/C,
analog component, analog RGB or external sync) of
equipment, according to the input signal.
When a cable is connected to one of these connectors,
the 75-ohm termination of the corresponding input is
automatically released, and the signal input to the input
connector is output.
d/I (Equipotential/Function Earth) terminal
(equipotential) terminal
Connects the equipotential plug.
I (function earth) terminal
Connects the earth cable.
eG/Y IN connector (BNC)
Input connector for G of RGB signals and component Y
(luminance) signals.
fB/PB IN connector (BNC)
Input connector for B of RGB signals and PB (blue color
difference) of component signals.
gR/PR IN connector (BNC)
Input connector for R of RGB signals and PR (red color
difference) of component signals.
hEXT SYNC IN (external sync input) connector
(BNC)
When this unit operates on an external sync signal,
connect the reference signal from a sync generator to
this connector.
To use the external sync signal, press the function button
that EXT SYNC is assigned (F1 button at the factory
setting).
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
iY/C IN connector (4-pin mini-DIN)
Input connector for Y/C signals.
jCOMPOSITE IN connector (BNC)
Input connector for composite signals.
5V24V IN
+5V
+24V
DC
IN G/Y OUT
IN B/PBOUT
IN R/PROUT
IN EXT
SYNCOUT
IN Y/C OUT
IN
COMPOSITE
OUT
1
2
5
qs
qd
qf
qg
qh
3
qa
4
0
9
8
7
6