Installing to the Rack (Using MB-531)
12
CAUTION
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
• When an optional LAN cable is connected, use a
shield type cable to prevent miss-operation due to
noises.
• The connection speed may be affected by the network
system. This unit does not guarantee the
communication speed or quality of 10BASE-T/
100BASE-TX.
fHDMI input connector
Input connector for HDMI signals.
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
digital connection, allowing you to enjoy high quality
digital picture and sound. The HDMI specification
supports HDCP (High-bandwidth Digital Content
Protection), a copy protection technology that
incorporates coding technology for digital video signals.
Note
Use HDMI compliant cable (optional) with HDMI logo.
gEJECT button
While sliding this button, remove the AC adaptor.
hTripod socket hole (1/4-20UNC, 3/8-16UNC)
When using a tripod, secure it to the monitor with this
hole.
iAC adaptor attachment
The monitor can also be operated with AC power by
attaching the AC adaptor.
jDC 12V IN jack (XLR-type, 4-pin)
Connects the DC 12V external power source to use the
monitor.
Installing to the Rack (Using MB-531)You can attach up to two monitors to the rack by using
the optional MB-531 Mounting Bracket.
1
Attach the mounting bracket to the monitor.
For details on attaching the mounting bracket,
refer to the Mounting Instructions of the MB-531.
2
Attach the unit to the rack with four screws.
Note
The screws are not supplied. Prepare screws according
to the rack.