Specifications
28
Pin assignment
PARALLEL REMOTE connector
Modular connector
(8-pin)
You can allocate functions using the REMOTE menu
(see page24).
Wiring required to use the Remote Control
Connect the function you want to use with a Remote
Control to the Ground (Pin 5).
Available signal formats
The unit is applicable to the following signal formats.
*1 The format on the screen is displayed as 1080/48I.
*2 The format on the screen is displayed as 1080/50I.
*3 The frame rate is also compatible with 1/1.001.
*4 The format is compatible with 4:2:2 YCbCr 10-bit of 3G-SDI.
Pin number Functions
1 Designating SDI input signal
2 Designating HDMI input signal
3 Designating composite input signal
4 Setting tally lamp green ON/OFF
185 GND
6 Setting tally lamp red ON/OFF
7 Selecting over scan
8 Selecting normal scan
Pin number Functions
System Total
lines
Active
lines
Frame
rate*3Scanning Aspect
ratio
Signal standard
Analog SDI (3G/HD/SD) HDMI
575/50I(PAL) 625 575 25 2:1 interlace 16:9/4:3 PAL:ITU-R BT.470 SMPTE-259M CEA-861
480/60I(NTSC) *3525 483 30 2:1 interlace 16:9/4:3 NTSC:SMPTE-170M S MPTE-259M CEA-861
576/50P 625 576 50 Progressive 16:9/4 :3 ––CEA-861
480/60P *3525 483 60 Progressive 16:9/4:3 ––CEA-861
640 × 480/60P *3525 480 60 Progressive 4:3 ––
CEA-861
1080/24PsF *1*31125 1080 24 Progressive(sF) 16:9 –SMPTE RP211 –
1080/25PsF *2*31125 1080 25 Progressive(sF) 16:9 –SMPTE RP211 –
1080/24P *31125 1080 24 Progressive 16:9 –SMPTE-274M CEA-861
1080/25P 1125 1080 25 Progressive 16:9 –SMPTE-274M CEA-861
1080/30P *31125 1080 30 Progressive 16:9 –SMPTE-274M CEA-861
1080/50I 1125 1080 25 2:1 interlace 16:9 –SMPTE-274M CEA-861
1080/60I *31125 1080 30 2:1 interlace 16:9 –SMPTE-274M CEA-861
720/50P 750 720 50 Progressive 16:9 –SMPTE-296M CEA-861
720/60P *3750 720 60 Progressive 16:9 –SMPTE-296M CEA-861
1080/50P *41125 1080 50 Progressive 16:9 –SMPTE-274M CEA-861
1080/60P *3*41125 1080 60 Progressive 16:9 –SMPTE-274M CEA-861