Sony LT29i Smart Connect

To scan a barcode

1When the NeoReader™ application is open, hold your device over the barcode

until the complete barcode is visible in the viewfinder.

2Your device automatically scans the barcode, and vibrates when the barcode is

recognized.

To enter a barcode manually

1When the NeoReader™ application is open, tap .

2Enter the numbers of the barcode in the text field, then tap GO!.

The following menu options are available in the NeoReader™ application:

Tap to open more options

Enter the barcode numbers manually. This option can be used if your camera has difficulty

reading the barcode

View a list of previously scanned barcodes

View information about the NeoReader™ application. Read more about different barcode types,

and about how to use NeoReader™

Select your personal settings, such as language or country. This information is used to

personalize barcode content. Also, you can select preferences for how you use the NeoReader™

application

Send a text message to invite a friend to download the NeoReader™ application

Smart Connect

Use the Smart Connect application to set what happens in your device when you

connect or disconnect an accessory. You can also use Smart Connect to set a specific

action or a group of actions to launch on your device at certain times of the day.

For example, when you connect your headset, you can create an event so that the

following actions are launched on your device:

•Between 7am and 9am, when you commute to work, the "WALKMAN" application

starts, and the web browser opens the morning paper. The ring volume is set to

vibrate.

•On the way back from work, the FM radio starts, and a notes app opens showing your

shopping list.

To start the Smart Connect application

1From your Home screen, tap .

2Find and tap .

To create a Smart Connect event

1Start the Smart Connection application. If you are opening Smart Connect for

the first time, tap OK to close the introduction screen.

2On the Events tab, tap .

3Give the event a name, then tap Create.

4Under When, add either an accessory or a time interval, or both.

5Under Do this, add what you want to happen in your device.

6Under At the end, add what you want to happen when you disconnect the

accessory or when the time interval comes to an end. If both these conditions

are set, the actions start either when you disconnect the accessory, or when the

time interval comes to an end.

7To save the event, press .

To add a Bluetooth® accessory, you have to first pair it with your device.