|
|
|
|
|
|
| Enjoying Playback Using the PBC Functions |
| Additional Information |
|
|
|
3Press the number buttons (1 - 10/0) to select the scene.
To enter “0”, use the button 10/0. Example: To select scene number 103
Press 1, then 10/0 and 3.
The selected scene number appears on the TV screen.
TV screen
SCENE 103 | (1 – 312) |
Selected scene number
If you’ve made a mistake
Press CLEAR, then press the correct number button.
4Press · to start playing from the selected scene. The player automatically starts PBC Playback (page 25).
zYou can check the scene number while playing a disc
Press ON SCREEN repeatedly to select ON SCREEN 2 display mode (see page 10). The scene numbers appear on the upper left side of the TV screen.
Notes
•Some discs don’t allow you to start playing from a particular scene. In this case, when you do the task before you start playing, the player starts playing from scene 1. When you do the task while playing a disc, the player starts playing from the current scene.
•Some discs don’t display the selected scene on the TV screen.
•When you select ON SCREEN OFF display mode, no information is shown on the TV screen.
Precautions
On safety
•Caution — The use of optical instruments with this product will increase eye hazard.
•Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.
On power sources
•Before operating the player, check that the operating voltage of the player is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the player.
•The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.
•If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.
•AC power cord must be changed only at the qualified service shop.
On placement
•Place the player in a location with adequate ventilation to prevent heat
•Do not place the player on a soft surface such as a rug that might block the ventilation holes on the bottom.
•Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
On operation
If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about an hour until the moisture evaporates.
On adjusting volume
Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played.
On cleaning
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
On transportation
See page 6.
On disc tray
Do not pull or push the disc tray forcefully by hand. It may damage the player.
If you have any questions or problems concerning your player, please consult your nearest Sony dealer.
27