1Connection
Connecting the Headphone System
Connecting the processor to digital components
Use the supplied optical digital connecting cable to connect the optical digital output jack* on a DVD device or other digital component to the DIGITAL IN jack of the processor.
Processor
To optical digital output jack
To DIGITAL IN jack
Optical digital connecting cable (supplied)
Match the orientation of the plug with the jack, and then insert until the plug fits into place.
DVD device or other digital component having an optical digital output jack
•The optical digital connecting cable is an extremely
•The digital input for the processor does not support sampling frequencies of 96 kHz. Set the digital output setting of the DVD device to 48 kHz when using this system. Noise may be heard when a 96 kHz digital signal is input.
*If the connected equipment supports PCM output only, all surround sound effects will be processed by DOLBY PRO LOGIC II.
DTS
•A
•When playing CDs recorded in DTS format, noise may occur when fast forwarding or rewinding. This is not a malfunction.
•If the DTS digital output is set to “OFF” on the DVD device, no sound may be heard even if the DTS output is selected in the DVD menu.
•No sound may be heard when a DVD device and this unit is