Connecting cables (sold separately)

Use the optical digital connecting cable POC-15AB (mini-plug y rectangular plug) when connecting the optical digital output mini-jack on portable DVD players, portable CD players, or other digital components to the DIGITAL IN jack.

Notes on optical digital connecting cable

•Do not drop objects on the optical digital connecting cable or expose the cable to shock.

•Grasp the plug to connect or disconnect the cable.

•Be sure that the ends of the optical digital connecting cable are kept clean. Dust at the ends of the cable can degrade performance.

•When storing the system, attach the cap to the end of the plug and be careful not to fold or bend the optical digital connecting cable with a bend radius less than 25 mm (1 inch).

The bend radius of the optical digital connecting cable should be no less than 25 mm (1 inch).

25 mm (1 inch)

Connecting the processor to analogue components

Use an audio cord (sold separately) to connect the audio output jacks on a VCR, TV, or other component to the LINE IN (stereo mini-jack) jack on the processor.

Processor

VCR, TV, or other

component

To audio output jacks

Audio left (white)

LINE IN jack

Audio right (red)

Audio cord (sold separately)

Connecting cables (sold separately)

Use the connecting cable RK-G136 (stereo mini-plug y stereo mini-plug) when connecting a stereo mini-jack (line out jack or headphone jack) to the LINE IN jack.

In this case, set the volume on the player at a medium level. Noise can occur if the volume on the player is set too low.

See “Specifications: Recommended accessories” (page 20) for details about other connecting cables (sold separately).

(Continued)
Connection 9GB