Sony MDR-DS3000 Notes, Setting, Connection 15GB, Connected components, Setting the input level

Setting the input level

If the volume is low using the analogue input, set the ATT (attenuator) switch to “0dB.”

ATT

0dB –8dB

Setting	Connected components
0dB	TV, portable components, and other components with a low output level
–8dB	Other components (initial settings)

Notes

•Be sure to lower the volume before setting the ATT switch.

•If audio input to the LINE IN jacks is distorted (sometimes, noise can be heard at the same time), set the ATT switch to “–8dB.”

Connection 15GB