14US Connection
Notes on optical digital connecting cable
Do not drop objects on the optical digital connecting cable or
expose the cable to shock.
Grasp the plug to connect or disconnect the cable.
Be sure that the ends of the optical digital connecting cable
are kept clean. Dust at the ends of the cable can degrade
performance.
When storing the system, attach the cap to the end of the
plug and be careful not to fold or bend the optical digital
connecting cable with a bend radius less than 25 mm (1
inch).
The bend radius of the optical digital
connecting cable should be no less
than 25 mm (1 inch).
25 mm
(1 inch)
Connecting the processor to analog components

Use an audio cord (sold separately) to connect the audio output jacks on a VCR, TV, or other

component to the LINE IN (L/R) jacks on the processor.

To audio output jacks
Audio cord
(sold separately)
Audio right (R, red)
To LINE IN jacks
Audio left
(L, white)
Audio left
(white)
Audio right (red)
VCR, TV, or other
component
Processor
Connecting cables (sold separately)
Use the connecting cable (stereo mini-plug pin plug 2) when connecting a stereo mini-jack
(headphones jack, etc.) to the LINE IN jacks.
In this case, set the volume on the player at a medium level. Noise can occur if the volume on the player is
set too low.