cTo connect to TV etc.
If noise occurs when the transmitter is connected to your TV or VCR, set the NOISE FILTER switch to ON.
Transmitter
to AUDIO IN A jack
Right channel | Left channel |
(red) | (white) |
Connecting cord (supplied)
to stereo mini jack
TV, etc.
Notes
•If you connect the transmitter to LINE OUT or REC OUT jack of an audio reproducer such as an MD player or CD player, do not set the NOISE FILTER switch to ON. Otherwise, the volume will be limited.
•The NOISE FILTER switch effects the sound only in cases such as connection diagram c. In diagrams a and b on page 7, the switch has no effect.
•When the transmitter is placed on or near a TV, it may pick up a noise.
In such case, place the transmitter away from the TV.
2 Connect the transmitter to an AC outlet using the supplied AC power adaptor.
Notes
•Use only the supplied AC power adaptor. Do not use any other AC power adaptor.
Polarity of the plug
•When you connect the connecting cord directly to an earphone jack, the audio signal will not be output through the right channel. In such a case, use the separately sold
•If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise.
*WALKMAN is a registered trademark of Sony Corporation.
8