4 Connect the transmitter to a power source.
Transmitter
to an AC outlet
To DC IN 9 V jack
AC power adaptor (supplied)
5 Press the OFF/CHG•POWER ON switch so that the OFF/CHG indicator lights up green.
Charging starts.
Notes
•Charge only the supplied rechargeable batteries
•You cannot recharge other R6 (size AA) rechargeable batteries
•Be sure to charge both the rechargeable batteries at a time. The charger cannot charge the batteries one by one.
•Use only the supplied AC power adaptor. Do not use any other AC power adaptor.
Polarity of the plug
If the indicator is not litCheck that the supplied rechargeable batteries are correctly inserted in the battery compartment of the transmitter.
To charge the batteries, follow steps above. Since little electric current is used for charging, there is no need to worry about overcharging.
Charging and using hoursApprox. charging | Approx. using time* |
hours |
|
|
|
1 | 50 minutes |
|
|
24** | 20 hours |
|
|
*at 1 kHz, 1 mW + 1 mW output
**The hours required to fully charge empty batteries
5