Troubleshooting
Problem Solution
Problem | Solution |
Distortion | If the transmitter is |
| connected to the headphones jack, |
| turn down the volume of the |
| connected audio/video equipment. |
|
|
| Select the radio frequency with the |
No sound/ Muffled sound
Turn on the transmitter first, then put on the headphones.
Check the connection of the audio/ video equipment or the AC power adaptor.
Check that the audio/video equipment is turned on.
Turn up the volume on the connected audio/video equipment, if the transmitter is connected to the headphones jack.
Select the radio frequency with the CHANNEL selector, then tune the headphones in the frequency of the transmitter with the TUNING control.
The mute function is activated. Use the headphones near the transmitter.
The headphones’ POWER indicator light is weak or turned off.
•Charge the rechargeable batteries or if the POWER indicator is still off after charging the batteries, replace them with new
•If you are using the conventional dry batteries, replace it with new ones.
If you connect the transmitter to LINE OUT or REC OUT jack of an audio reproducer, make sure that the NOISE FILTER switch is set to OFF.
| CHANNEL selector. |
| The headphones’ POWER indicator |
| light is weak or turned off. |
| •Charge the rechargeable batteries or |
| if the POWER indicator is still off |
| after charging the batteries, replace |
| them with new |
| |
| •If you are using the conventional |
| dry batteries, replace it with new |
| ones. |
|
|
| If you connect the transmitter to LINE |
| OUT or REC OUT jack of an audio |
| reproducer, make sure that the NOISE |
| FILTER switch is set to OFF. |
|
|
Loud | Move closer to the transmitter. As |
background | you move away from the transmitter, |
noise | more noise is likely to be heard. |
|
|
| If the transmitter is connected to the |
| headphones jack, turn up the volume |
| of the connected audio/video |
| equipment. |
|
|
| Select the radio frequency with the |
| CHANNEL selector, then tune in the |
| frequency of the transmitter with the |
| TUNING control. |
|
|
| The headphones’ POWER indicator |
| light is weak or turned off. |
| •Charge the rechargeable batteries or |
| if the POWER indicator is still off |
| after charging the batteries, replace |
| them with new |
| |
| •If you are using the conventional |
| dry batteries, replace it with new |
| ones. |
|
|
| If you connect the transmitter to LINE |
| OUT or REC OUT jack of an audio |
| reproducer, make sure that the NOISE |
| FILTER switch is set to OFF. |
|
|
continue to next page
11