Brother PC-2800 operation manual Setting The Needle Stop Down Position

SETTING THE NEEDLE STOP DOWN POSITION

If you set the needle stop position to the down position when you select a stitch, the needle stops in the down position when sewing is finished. It is not necessary to press the “NEEDLE POSITION” button to lower the needle before rotating the fabric when continuously starting and stopping sewing.

	Touch the needle stop position switch key. The LED lamp above
1	the key will light up. The needle stop position is set to the down
	position.
	1	When the needle stop position switch key's LED lamp is
		lit, the needle stop position is set to the down position.
		When the needle stop position switch's LED lamp is turned
		off, the needle stop position is set to the up position.
	*	You must press the needle stop position switch key to change
		it. It will not change automatically when another key is pressed
		(except when the main power switch is turned OFF).

CONTENTS

BEFORE USE

SEWING

Canceling the needle stop down position setting

Press the needle stop position switch key to turn off the LED lamp. The needle stop position will be set in the up position.

*When the main power switch is turned to ON, the needle stop position switch key's LED lamp will turn off, and the needle stop position will be set in the up position.

PATTERNS UTILITY STITCHES MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

29