Brother PC-2800 operation manual Overcasting When Using The Optional Side Cutter, Normal sewing

OVERCASTING (WHEN USING THE OPTIONAL SIDE CUTTER)

1 7 8

1: Normal sewing

7:Overcasting stitch for light and medium weight fabrics

8:Overcasting stitch for heavyweight fabrics

1.Push the “NEEDLE POSITION” button to raise the needle, then turn off the power.

2.Raise the presser foot lever.

CONTENTS

BEFORE USE

5

6 1

2

5

6

3.Press the black button at the back of the presser foot holder, and remove the presser foot.

4.Use the included disc-shaped screwdriver to loosen the screw of the presser foot holder, and remove the presser foot holder.

5.Set the fork of the operating lever around the needle clamp screw.

1Needle clamp screw

2 Operating lever

*Make sure that the fork of the operating lever is set onto the screw firmly.

6.With the presser foot raised, align the presser foot holder screw hole directly with the notch in the side cutter, then insert the screw and lightly tighten it. Lower the presser foot lever and firmly tighten the screw.

SEWING

PATTERNS UTILITY STITCHES MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

38