Brother PC-2800 operation manual Thread cutter

6

3.While pressing down on the thread and the fabric with your left hand, turn the balance wheel with your right hand to move the needle to the sewing start position.

1Thread

*You can begin sewing without drawing up the bobbin thread.

CONTENTS

BEFORE USE

5

6

5

6

4.Lower the presser foot. Press the “REVERSE STITCH” but- ton to sew a few reverse stitches, and then press the “START/ STOP” button. The machine will start sewing at a slow speed.

*Reverse stitches are sewn while the “REVERSE STITCH” button is pressed.

*The sewing speed cannot be adjusted while reverse stitches are sewn.

5.When sewing is completed, press the “REVERSE STITCH” button to sew a few reverse stitches.

*If the needle stop position is set to the down position (the nee- dle stop position switch key’s LED lamp is lit), press the “NEE- DLE POSITION” button to raise the needle.

SEWING

UTILITY STITCHES MAINTENANCE

1

6. Raise the presser foot, remove the fabric and cut the thread.

1Thread cutter

PATTERNS SEWING CHART(PROGRAMMED IN MACHINE)

28