Brother PC-2800 operation manual Flat Fell Seam, For reinforcing seams and neatly finishing edges

FLAT FELL SEAM

2

J

For reinforcing seams and neatly finishing edges

1.Attach presser foot “J”. Sew the seam line, then cut half of the seam allowance from the side that the flat fell seam will lie against.

1About 12 mm (1/2")

2 Wrong side of fabric

2. Spread out the fabric along the finish line.

1Finish line

2Wrong side of fabric

3.Lay both seam allowances to the shorter one’s (cut one) side and iron them.

1Wrong side of fabric

4.Fold the longer seam allowance around the shorter one, and sew the edge of the fold.

1Wrong side of fabric

*Flat-fell seam can be on the inside or outside. For example for denim jeans, jackets, etc., seam is on the outside, rather than inside as shown above.

CONTENTS

BEFORE USE

SEWING

PATTERNS UTILITY STITCHES MAINTENANCESEWING CHART(PROGRAMMED IN MACHINE)

55