Brother PC-2800 Trial Sewing, Sewing using a utility stitch, Chapter, Upper thread 2 5 cm

1. SEWING CHAPTER 2

TRIAL SEWING

Sewing using a utility stitch

CAUTION

•To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation.

•Do not stretch or pull the fabric during sewing. Doing so may lead to injury.

•Do not use bent or broken needles. Doing so may lead to injury.

•Take care that the needle does not strike basting pins or other objects during sewing. Otherwise, the needle may break and cause injury.

•If stitches become bunched, lengthen the stitch length setting before continuing sewing. Otherwise, the needle may break and cause injury.

3

4

5

2 1

1.Turn on the sewing machine. The straight stitch (left) is se- lected.

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES MAINTENANCE

1

2

2.Install the correct presser foot. Place the fabric under the presser foot, then pull out about 5 cm (2") of the upper thread and pass it under the presser foot toward the rear of the ma- chine.

1Upper thread

2 5 cm (2")

CAUTION

Always use the correct presser foot. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, resulting in injury.

PATTERNS SEWING CHART(PROGRAMMED IN MACHINE)

27