Brother PC-2800 Eyelet Stitch, Size of eyelet actual size, For sewing eyelets on belts, etc

EYELET STITCH

20

1

2

3

N

For sewing eyelets on belts, etc.

1.Press the stitch width manual change key to turn on the LED lamp.

2.Use the stitch width adjustment lever to select the eyelet size.

1Large

2 Medium

3 Small

*When the stitch width is at the default setting (the stitch width manual change key’s LED lamp is blinking) the large eyelet will be sewn.

*Stitch length can not be adjusted.

3.Attach monogramming foot “N”, then turn the balance wheel to check the needle drop position. Lower the presser foot le- ver and start sewing. When sewing is finished, the machine sews reinforcement stitches and stops automatically.

1Needle drop position

4.Use the eyelet punch to make a hole in the center of the stitch- ing.

CONTENTS

BEFORE USE

SEWING

UTILITY STITCHES MAINTENANCE

Size of eyelet (actual size)

A– Large: 7.0 mm (9/32")

B– Medium: 6.0 mm (1/4")

C– Small: 5.0 mm (13/64")

A B C

PATTERNS SEWING CHART(PROGRAMMED IN MACHINE)

47