Brother PC-2800 Needle, Checking the needle, Installing the needle securely, Parallel space

NEEDLE

Checking the needle

CAUTION

•Turn the main power switch to OFF before changing the needle. If the main power is left on and the “START/STOP” button or another operation button is pressed accidentally, the machine will start and injury may result.

•Use only sewing machine needles for home use. Other needles may bend or break and cause injury.

•Never sew with a bent needle. A bent needle will easily break and cause injury.

To Check the Needle Correctly:

To check the needle, place the flat side of the needle on a flat surface. Check the needle from the top and the sides. Throw away any bent needles.

1Parallel space

2 Level surface (bobbin cover, glass, etc.) 1

2

* Place a level surface under the needle

Installing the needle securely

CONTENTS

BEFORE USE

SEWING

UTILITY

6

6

2

1

3

1.Push the “NEEDLE POSITION” button to raise the needle, and then turn off the power.

2.Lower the presser foot.

3.Loosen the needle clamp screw with a screwdriver.

4.Pull out the needle.

CAUTION

Do not loosen or tighten the needle clamp screw with a strong force, otherwise it may be damaged

5.With the flat side of the needle facing the back, insert the new needle all the way to the top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely tighten the needle clamp screw.

1Needle stopper

2Hole for setting needle

3 Flat side of needle

STITCHES MAINTENANCESEWING CHART

CAUTION

Be sure to push in the needle until it touches the stopper, and securely tighten the needle clamp screw with a screwdriver. If the needle is not completely inserted or the needle clamp screw is loose, the needle may break or the machine may be damaged.

PATTERNS (PROGRAMMED IN MACHINE)

25